24/7 Service Hotline +49 5933 92467-247
Options
Piston-Slider
To seal the press plate during the pressing operation, preventing any material from entering the lance guide slots, a hydraulically driven closing plate is installed on the press plate. This closing plate shuts the needle slots during the pressing stroke and is exclusively opened during the strapping process. This ensures a wire-tear-free workflow and diminishes the need for frequent cleaning and maintenance intervals.
Bottom-Slider
For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.
This closes the needle slots in the press floor during the pressing stroke. These needle slots are only opened during the strapping process.
This guarantees a wire-crack-free workflow and low cleaning and maintenance intervals.
Pre-Press Flaps
Two-part side pre-compression flaps for effective pre-compression of difficult-to-cut materials.
Hardox interior trim
10 mm thick inner lining of the entire pressing chamber made of wear-resistant steel in bolted design.
Special equipment for artificial mineral fibres
Equipment package to equip the channel baler for the pressing of artificial mineral fibres.
Straight to the destination
In the vehicle-mobile variant, our location-independent channel balers are mounted on a trailer and can thus be brought to their place of use. Like the hook-lift mobile solution, which is available as an alternative, the vehicle-mounted channel baler is an energy-efficient and safe machine for pressing directly on site. It can be requested with wire or yarn strapping.
Independent at full power
The mobile channel balers can be used in a wide range of applications. The flexible machines can be used at changing locations to compress waste materials. Materials such as paper, cardboard and plastics, but also natural waste of various kinds, are compressed into solid bales that require significantly less storage and transport and are suitable for reuse. Both the vehicle-mobile and the hook-lift-mobile solutions are easy to handle, powerful and reliable all round.
- Press force of 80 Tons
- Stable construction of the base frame
- Height adjustability of the press shield
- Highest flexibility
- Optionally with piston bottom valve
Options
Hardox Interior Trim
10 mm thick Hardox plates in the interior of the press ensure a long service life, even with highly abrasive material
Height-adjustable press ram
To counteract wear, the height of the press ram can be adjusted at any time via a threaded rod on the roller.
In this way, you can ensure an optimum blade gap again in the case of wear.
Remote control
This allows the operator to comfortably operate the machine from the excavator or cyclist.
Up to 8 functions can be freely programmed according to the customer's wishes.
Benefits EP 120 VG7 mobil
Product details
The mobile channel balers can be used almost anywhere. Whether in the field, at the landfill or at various disposal sites. An optional diesel unit offers smooth self-sufficient operation compared to the electric drive.
As the permissible transport weight is limited, yarn strapping on this machine is particularly attractive. This makes it possible to carry a large amount of twine without wasting large capacities of the transport weight.
The optional bale wrapping unit, which can also be installed on the trailer, ensures sealed bales, which is particularly interesting for small grain sizes or hazardous material such as artificial mineral fibres.
Michael Brinkmann
Sales and Consulting
michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16