24/7 Service Hotline      +49 5933 92467-247          


Technical data EP 120

4-Fold Horizontal
5-Fold Horizontal high-rise format
5-Fold Vertical
5-Fold Vertical + 3-Fold Horizontal
Press force120 Tons
Filling opening1.000 x 2.000 mm
Channel cross-section750 x 1.100 mm
Drive power45 - 2 x 75 KW
Bale weight500 - 700 KG
Bale lengthup to 2.000 mm
Machine length12.800 mm
Machine width2.400 mm
Machine height4.250 mm
Machine weight32 Tons


Weight capacity depending on bulk weight [theoretically] in tonnes per hour

20 - 30 kg/m³6 - 34
35 - 50 kg/m³10 - 56
60 kg/m³12 - 67
100 kg/m³20 - 112


Geschlossener Kolbenschieber: Europress Lösung für kontrollierte Ballenformung

To seal the press plate during the pressing process and prevent any material from entering the lance guide slots, a hydraulically driven closing plate is installed on the press plate. This plate closes the needle slots during the pressing stroke, and these needle slots are only opened during the strapping process. This ensures a wire tear-free work process and reduces the need for cleaning and maintenance intervals.

Geöffneter Bodenschieber: Flexibilität in der Ballenproduktion mit Europress

For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.

This closes the needle slots in the press floor during the pressing stroke. These needle slots are only opened during the strapping process.

This guarantees a wire-crack-free workflow and low cleaning and maintenance intervals.

Vorpressklappen geschlossen: Europress Lösung für kontrollierte Ballenformung
Prepress Flaps

Two-part side prepress flaps for effective pre-compaction of difficult-to-cut materials.


Perforator von Europress: Präzise Durchlöcherung für optimale Ballen

Perforator for perforating and squeezing PET bottles, retractable from the side or from the rear.

The perforator is equipped with two drums that rotate in reverse direction shortly after each other and are fitted with over 1000 spikes.

Wirbulator von Europress: Präzise Materialverteilung für optimale Ballen

WEP ruffler that can be retracted from behind on a console with a drive power of 22 kW.

This allows smooth surfaces, for example of catalogues, to be broken, so that better compaction is possible. 

Hardox-Innenverkleidung: Materialauskleidung für höchste Ansprüche
Hardox interior trim

10 mm thick inner lining of the entire pressing chamber made of wear-resistant steel in bolted design.


KMF-Sonderausstattung: Europress Innovation für spezielle Anforderungen
Special equipment for artificial mineral fibres

Equipment package to equip the channel baler for the pressing of artificial mineral fibres.


The high Standard

In the EP series, our channel balers with wire strapping present themselves as slim systems of high stability and reliability. Waste such as paper, cardboard and PET bottles are compacted fully automatically and securely tied with strong wire. Only the amount of wire that is actually necessary for an effective result is used. The waste products can then be transported or stored as compact bales to save costs and space.


Compact power density

EP series - reliability without embellishment

The optimised design of our wire-tied channel balers allows for easy maintenance, which saves both time and money. Perfectly matched cutting edges ensure an energy-efficient, millimetre-accurate cut with little wear. The straight-line compactness of the EP series stands for effectiveness that has proven itself over a long period of time in the compaction of waste products. A wide variety of materials such as paper, cardboard and plastics are compressed into firm, space-saving bales that significantly reduce the effort required for storage and transport.

  • Suitable for industrial applications or low to medium material volume
  • Edged press body
  • Pressing force of 60 up to 120 tons
  • Height adjustability of the press plate
  • Stable construction of the base frame
  • Easy handling
  • Powerful
  • Reliable



Michael Brinkmann

Sales and Consulting

Tel.: +49 5933 92467-16

Do you have any questions or suggestions? I am at your disposal by phone or by e-mail.


Which product groups are you interested in?