24/7 Service Hotline +49 5933 92467-247
Options
Piston-Slider
To prevent material from entering the lance guide slots during the pressing process, a hydraulically driven closing plate is mounted on the press plate. This closing plate seals the needle slots during the pressing stroke and is only opened during the strapping process.
This ensures a wire tear-free work process and reduces the need for cleaning and maintenance intervals.
Bottom-Slider
For closing the floor during the pressing process so that no material gets into the lance guide slots. Hydraulically driven sealing plate installed under the floor wear plates.
This closes the needle slots in the press floor during the pressing stroke. These needle slots are only opened during the strapping process.
This guarantees a wire-tear-free work process and low cleaning and maintenance intervals.
Pre-Press Flaps
Lateral two-part pre-compression flaps for effective pre-compression of difficult-to-cut materials.
Perforator
Perforator for perforating and compressing PET bottles, retractable from the side or rear.
The perforator is equipped with two drums that rotate in quick succession in the opposite direction and are fitted with over 1000 spikes
The spikes are aligned in such a way that the bottles are not trapped between them.
Ruffler
WEP whirling unit with a drive power of 22 kW that can be retracted from the rear on a console.
This can be used to break smooth surfaces, for example of catalogues, so that better compaction is possible.
Hardox interior panelling
10 mm thick inner panelling of the entire pressing chamber made of wear-resistant steel in bolted design.
Special equipment for artificial mineral fibres
Equipment package to equip the channel baling press for the pressing of KMF (artificial mineral fibres).
Yarn strapping
Yarn strapping is a proven alternative to wire strapping. In these equally high-quality channel balers, yarn knotters take over the strapping after the baling process. This variant saves costs and enables immediate burning of the bales without prior opening. Accordingly, channel balers with yarn strapping are particularly suitable for compressing natural products such as hay, straw and plants.
A coordinated system
Various types of yarn are available for the channel balers with yarn strapping, which can be varied according to specific requirements. Biodegradable twine can also be used. Like the wire-strapped models, these channel balers also have a high-performance bale shield that produces balanced bales of optimum size. The tuned geometry of the cutting edges reduces wear to a minimum. Easy access to all areas also enables efficient and thorough maintenance.
- Pressing force between 60 and 180 tons
- Stable construction of the basic frame
- Height adjustment of the pressing plate
- Energy saving due to axial piston pump
- Optional prepress flap technology
Michael Brinkmann
Sales and Consulting
michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16