24/7 Service Hotline      +49 5933 92467-247          


Technical Data HP-B 180

Strapping6-Fold Vertikal
Press force180 Tonnen
Filling opening1.000 x 2.000 mm
Channel cross-section750 x 1.100 mm
Drive power45 - 3 x 75 kW
Bale weight700  - 1800 KG
Bale lengthup to 2,2 m
Length13.900 mm
Width2.550 mm
Height4.250 mm
Total Weight ca. 36 Tonnen

Weight capacity depending on bulk density [theoretical] in tons per hour

20 - 30 kg/m³7 - 28
35 - 50 kg/m³12 - 47
60 kg/m³14 - 56
100 kg/m³24 - 93


Geschlossener Kolbenschieber: Europress Lösung für kontrollierte Ballenformung

To prevent material from entering the lance guide slots during the pressing process, a hydraulically driven closing plate is mounted on the press plate. This closing plate seals the needle slots during the pressing stroke and is only opened during the strapping process.

This ensures a wire tear-free work process and reduces the need for cleaning and maintenance intervals.

Geöffneter Bodenschieber: Flexibilität in der Ballenproduktion mit Europress

For closing the floor during the pressing process so that no material gets into the lance guide slots. Hydraulically driven sealing plate installed under the floor wear plates.

This closes the needle slots in the press floor during the pressing stroke. These needle slots are only opened during the strapping process.

This guarantees a wire-tear-free work process and low cleaning and maintenance intervals.

Vorpressklappen geschlossen: Europress Lösung für kontrollierte Ballenformung
Pre-Press Flaps

Lateral two-part pre-compression flaps for effective pre-compression of difficult-to-cut materials.


Perforator von Europress: Präzise Durchlöcherung für optimale Ballen

Perforator for perforating and compressing PET bottles, retractable from the side or rear.

The perforator is equipped with two drums that rotate in quick succession in the opposite direction and are fitted with over 1000 spikes

The spikes are aligned in such a way that the bottles are not trapped between them.

Wirbulator von Europress: Präzise Materialverteilung für optimale Ballen

WEP whirling unit with a drive power of 22 kW that can be retracted from the rear on a console.

This can be used to break smooth surfaces, for example of catalogues, so that better compaction is possible.

Hardox-Innenverkleidung: Materialauskleidung für höchste Ansprüche
Hardox interior panelling

10 mm thick inner panelling of the entire pressing chamber made of wear-resistant steel in bolted design.

KMF-Sonderausstattung: Europress Innovation für spezielle Anforderungen
Special equipment for artificial mineral fibres

Equipment package to equip the channel baling press for the pressing of KMF (artificial mineral fibres).


Yarn strapping

Yarn strapping is a proven alternative to wire strapping. In these equally high-quality channel balers, yarn knotters take over the strapping after the baling process. This variant saves costs and enables immediate burning of the bales without prior opening. Accordingly, channel balers with yarn strapping are particularly suitable for compressing natural products such as hay, straw and plants.

A coordinated system

Various types of yarn are available for the channel balers with yarn strapping, which can be varied according to specific requirements. Biodegradable twine can also be used. Like the wire-strapped models, these channel balers also have a high-performance bale shield that produces balanced bales of optimum size. The tuned geometry of the cutting edges reduces wear to a minimum. Easy access to all areas also enables efficient and thorough maintenance.

  • Pressing force between 60 and 180 tons
  • Stable construction of the basic frame
  • Height adjustment of the pressing plate
  • Energy saving due to axial piston pump
  • Optional prepress flap technology



Michael Brinkmann

Sales and Consulting

Tel.: +49 5933 92467-16

Do you have any questions or suggestions? I am at your disposal by phone or by e-mail.


Which product groups are you interested in?