24/7 Service Hotline +49 5933 92467-247
Technical data HP-B 180
| Tying | 5-Fold horizontal 5-Fold vertical 5-Fold vertical + 4-Fold horizontal |
| Press force | 180 Tons |
| Filling opening | 1.000 x 2.000 mm |
| Channel cross-section | 750 x 1.100 mm |
| Drive power | 45 - 3 x 75 kW |
| Bale weight | 600 - 900 KG |
| Bale length | up to 2,0 m |
| Length | 13.900 mm |
| Width | 2.550 mm |
| Height | 4.250 mm |
| Total Weight | approx. 36 Tons |
Options
Piston-Slider
For closing the press plate during the pressing process so that no material enters the lance guide slots. Hydraulically driven closure plate mounted on the press plate.
This closes the needle slots during the press stroke. These needle slots are only opened during the tying process.
This guarantees a wire-crack-free workflow and reduced cleaning and maintenance intervals.
Bottom-Slider
For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.
This closes the needle slots in the press floor during the press stroke. These needle slots are only opened during the tying process.
This guarantees a wire-crack-free workflow and low cleaning and maintenance intervals.
Pre-Press Flaps
Lateral two-part pre-compression flaps for effective pre-compression of difficult-to-cut materials.
Perforator
Perforator for perforating and squeezing PET bottles, retractable from the side or from the rear.
The perforator is equipped with two drums rotating in reverse direction shortly after each other and equipped with more than 1000 spikes.
The spikes are aligned so that the bottles are not jammed between them.
Ruffler
WEP whirler retractable from the rear on a console with a drive power of 22 kW.
This allows smooth surfaces, for example of catalogs, to be broken so that better compaction is possible.
Hardox interior lining
10 mm thick inner lining of the entire bale chamber made of wear-resistant steel in bolted design.
Special equipment for artificial mineral fibres
Equipment package to equip the channel baler ready for approval for the compression of artificial mineral fibers.
The optimal equipment
With various additional features that allow adaptation to specific challenges, our channel balers with wire tying in the HP series prove to be particularly versatile and versatile in use. As required, each baler can be equipped with, among other things, a fast-lift cylinder for energy savings or protected against wear and tear by full Hardox equipment. Remote control operation also facilitates work, with maximum security provided by the key transfer system fitted as standard. Our HP models are individually equipped to master demanding tasks in waste compaction in line with customer requirements.
Everything and more
With its technically advanced but easy-to-use additional functions, the HP series is excellently equipped for applications under difficult conditions or with specific targets that require, for example, variable tying, a strong reduction in wear, or an analysis system for higher safety. Through individual consultation, we always find the right solutions for our customers that fully meet the requirements in waste compaction. As an alternative to the HP series, we provide our customers with the slim standard variant.
- Pressing force between 150 and 210 tons
- Stable construction of the base frame
- Height adjustability of the press ram
- Piston-Bottom-Slider
- Cardanic suspension of the main cylinder
Michael Brinkmann
Sales and Consulting
michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16