24/7 Service Hotline +49 5933 92467-247
Technical data EP-B 120
|
Options
Piston-Slider
For closing the press plate during the pressing process so that no material enters the lance guide slots. Hydraulically driven closure plate mounted on the press plate.
This closes the needle slots during the press stroke. These needle slots are only opened during the tying process.
This guarantees a wire-crack-free workflow and reduced cleaning and maintenance intervals.
Bottom-Slider
For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.
This closes the needle slots in the press floor during the press stroke. These needle slots are only opened during the tying process.
This guarantees a wire-crack-free workflow and low cleaning and maintenance intervals.
Vorpressklappen
Lateral two-part pre-compression flaps for effective pre-compression of difficult-to-cut materials.
Perforator
Perforator for perforating and squeezing PET bottles, retractable from the side or from the rear.
The perforator is equipped with two drums rotating in reverse direction shortly after each other and equipped with more than 1000 spikes.
The spikes are aligned so that the bottles are not jammed between them.
Hardox interior lining
10 mm thick inner lining of the entire bale chamber made of wear-resistant steel in bolted design.
Special equipment for artificial mineral fibers
Equipment package to equip the channel baler ready for approval for the compression of artificial mineral fibers.
Naturally well tied
Twine tying is a proven alternative to wire tying. In these equally high-quality channel balers, twine knotters take over the tying after the baling process. This variant saves costs and enables immediate burning of the bales without prior opening. Accordingly, channel balers with twine binding are particularly suitable for compressing natural products such as hay, straw and plants.
A coordinated system
Various types of twine are available for the channel balers with twine binding, which can be varied according to specific requirements. Biodegradable twine can also be used. Like the wire-tied models, these channel balers also have a high-performance bale shield that produces balanced bales of optimum size. The tuned geometry of the cutting edges reduces wear to a minimum. Easy access to all areas also enables efficient and thorough maintenance.
- Pressing force between 60 and 210
- Stable construction of the base frame
- Height adjustment of the press ram
- Energy saving due to axial piston pump
- Optional prepress flap technology
Michael Brinkmann
Sales and Consulting
michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16