24/7 Service Hotline      +49 5933 92467-247          

CHANNEL BALING PRESSES WITH TWINE TYING EP 80

Technical Data EP 80

Tying6-Fold Vertical 
Press force80 Tons
Filling opening1000 x 1800 mm
Channel cross-section680 x 1100 mm
Drive power45 - 2 x 75 kW
Bale weight250 - 700 KG
Bale lengthup to 2.200 mm
Machine length10.000 mm
Machine width2.550 mm
Machine height5.100 mm
Machine weight19,5 Tons

 

Options

Kolbenschieber geschlossen
Piston-Slider

For closing the press plate during the pressing process so that no material enters the lance guide slots. Hydraulically driven closure plate mounted on the press plate.

 

This closes the needle slots during the press stroke. These needle slots are only opened during the tying process.

This guarantees a wire-crack-free workflow and reduced cleaning and maintenance intervals.

Bodenschieber geöffnet
Bottom-Slider

For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.

This closes the needle slots in the press floor during the press stroke. These needle slots are only opened during the tying process.

This guarantees a wire-crack-free workflow and low cleaning and maintenance intervals.

Perforator
Perforator

Perforator for perforating and squeezing PET bottles, retractable from the side or from the rear.

The perforator is equipped with two drums rotating in reverse direction shortly after each other and equipped with more than 1000 spikes.

The spikes are aligned so that the bottles are not jammed between them.

Hardox Innenverkleidung
Hardox interior lining

10 mm thick inner lining of the entire bale chamber made of wear-resistant steel in bolted design.

 

KMF Sonderausstattung
Special equipment for artificial mineral fibres

Equipment package to equip the duct baler ready for approval for the compression of artificial mineral fibers.

 

Naturally well tied

String tying is a proven alternative to wire binding. In these equally high-quality channel balers, twine knotters take over the tying after the baling process. This variant saves costs and enables immediate burning of the bales without prior opening. Accordingly, channel balers with twine binding are particularly suitable for compressing natural products such as hay, straw and plants.

 

A coordinated system

Various types of twine are available for the channel balers with twine binding, which can be varied according to specific requirements. Biodegradable twine can also be used. Like the wire-tied models, these channel balers also have a high-performance bale shield that produces balanced bales of optimum size. The tuned geometry of the cutting edges reduces wear to a minimum. Easy access to all areas also enables efficient and thorough maintenance.

 

  • Pressing force between 60 and 210 tons
  • Stable construction of the base frame
  • Height adjustment of the press ram
  • Energy saving due to axial piston pump
  • Optional prepress flap technology

 

 

Michael Brinkmann

Sales and Consulting


michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16

Do you have any questions or suggestions? I am at your disposal by phone or by e-mail.