24/7 Service Hotline +49 5933 92467-247
Technical Data HP 100
| Tying | 4-Fold Horizontal 5-Fold Horizontal high-rise format 5-Fold Vertical 5-Fold Vertical + 3-Fold Horizontal |
| Press force | 100 Tons |
| Filling opening | 1.000 x 2.000 mm |
| Channel cross-sections | 750 x 1.100 mm |
| Drive power | 45 - 2 x 75 KW |
| Bale weight | 500 - 800 KG |
| Bale length | up to 2.000 mm |
| Machine length | 12.800 mm |
| Machine width | |
| Machine height | 4.250 mm |
| Machine weight | ca. 30 Tons |
Options
Piston-Slider
For closing the press plate during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closing plate mounted on the press plate.
This closes the needle slots during the pressing stroke. These needle slots are only opened during the tying process.
This guarantees a wire-crack-free workflow and shorter cleaning and maintenance intervals.
Bottom-Slider
For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.
This closes the needle slots in the press floor during the pressing stroke. These needle slots are only opened during the tying process.
This guarantees a wire-crack-free workflow and low cleaning and maintenance intervals.
Prepress Flaps
Two-part side prepress flaps for effective pre-compaction of difficult-to-cut materials.
Perforator
Perforator for perforating and squeezing PET bottles, retractable from the side or from the rear.
The perforator is equipped with two drums that rotate in reverse direction shortly after each other and are fitted with over 1000 spikes.
Ruffler
WEP ruffler that can be retracted from behind on a console with a drive power of 22 kW.
This allows smooth surfaces, for example of catalogues, to be broken, so that better compaction is possible.
Hardox interior trim
10 mm thick inner lining of the entire pressing chamber made of wear-resistant steel in bolted design.
Special equipment for artificial mineral fibres
Equipment package to equip the channel baler for the pressing of artificial mineral fibres.
The perfect equipment
Thanks to various additional functions that allow adaptation to specific challenges, our channel balers with wire tying in the HP series prove to be particularly versatile and powerful in use. If required, each baler can be equipped with, among other things, a high-speed main cylinder for energy saving or be protected against wear and tear by a Hardox full equipment. Operation by remote control also makes work easier, with the highest possible level of security thanks to the key transfer system fitted as standard. Our HP models are individually equipped to master demanding tasks in waste compaction in a customer-oriented manner.
Everything and more
With its technically sophisticated but easy-to-use additional functions, the HP series is excellently equipped for applications under difficult conditions or with specific targets that require, for example, variable tying, a strong reduction in wear or an analysis system for higher safety. Through individual consultation, we always find the right solutions for our customers that fully meet the requirements in waste compaction. As an alternative to the HP series, we provide our customers with the slim standard variant.
- Pressing force between 100 and 180 tons
- Stable construction of the base frame
- Height adjustability of the press shield
- Piston- and bottom sliders
- Cardanic suspension of the main cylinder
Michael Brinkmann
Sales and Consulting
michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16