24/7 Service Hotline +49 5933 92467-247
Technical data EP 60
| Strapping | 4-Fold Horizontal 5-Fold Horizontal high-rise format 5-Fold Vertikal |
| Press force | 60 tons |
| Filling opening | 1.000 x 1.600 mm |
| Channel cross-section | 750 x 1.100 mm |
| Drive power | 22 - 2 x 45 kW |
| Bale weight | 400 - 500 kg |
| Bale length | bis 1,8 m |
| Length | 9.800 mm |
| Width | 2.580 mm |
| Height | 3.900 mm |
| Machine weight | 18,5 Tons |
Options
Piston-Slider
To seal the press plate during the pressing operation to prevent any material from entering the lance guide slots, a hydraulically driven closure plate is mounted on the press plate.
This closure plate shuts the needle slots during the pressing stroke, and these needle slots are exclusively opened during the strapping process.
This ensures a workflow without wire cracks and minimizes the need for cleaning and maintenance intervals.
Bottom-Slider
For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.
This closes the needle slots in the press floor during the press stroke. These needle slots are only opened during the strapping process.
As a result, we guarantee a wire-crack-free workflow and low cleaning and maintenance intervals.
Perforator
Perforator for perforating and squeezing PET bottles, retractable from the side or rear.
The perforator is equipped with two drums that rotate in reverse direction shortly after each other and are equipped with over 1000 spikes
The spikes are aligned so that the bottles are not trapped between them.
Ruffler
WEP whirler retractable from the rear on a console with a drive power of 22 kW.
This allows smooth surfaces, for example of catalogs, to be broken, so that better compaction is possible.
Hardox interior trim
10 mm thick inner lining of the entire bale chamber made of wear-resistant steel in bolted design.
Special equipment for artificial mineral fibres
Equipment package to equip the duct baler ready for approval for the compression of artificial mineral fibers.
The optimal equipment
With various additional features that allow adaptation to specific challenges, our channel balers with wire strapping in the HP series prove to be particularly versatile and versatile in use. As required, each baler can be equipped with, among other things, a fast-lift cylinder for energy savings or protected against wear and tear by full Hardox equipment. Remote control operation also facilitates work, with maximum security provided by the key transfer system fitted as standard. Our HP models are individually equipped to master demanding tasks in waste compaction in line with customer requirements.
Compact power density
The optimized design of our wire-bound channel balers enables easy maintenance, saving both time and money. Perfectly matched cutting edges ensure an energy-efficient, millimeter-accurate cut with little wear. The straight-line compactness of the EP series stands for effectiveness, proven over a long period of time in the compaction of waste products. A wide variety of materials such as paper, cardboard, and plastics are compressed into firm, space-saving bales that significantly reduce storage and transport requirements.
- Suitable for industrial applications or low to medium material volumes
- Edged press body
- Pressing force of 60 or 80 tons
- Low space requirement
- Height adjustability of the pressing shield
- Stable construction of the base frame
- Easy handling
- High performance
- Reliable
Michael Brinkmann
Sales and Consulting
michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16